Precision 1-1/8 bar & Mount Yamaha YZ250F/450F (2023-UP) | PDS1C-3010
$ 625.00
Description
Precision Installation Instructions
Steering Stabilizer for 1-1/8" Handlebars. With mounting kit for Yamaha YZ450F 2023-24, 2024 YZ250F/250FX/YZ450FX. Handlebar positions are counted from the closest to the rider #1 out. Standard position may not be your bikes stock position please double check the handlebars position on your bike. Position #1 of 4 closest to the rider is not recommended. It requires a spacer under the handlebar clamps and stretches the throttle cable.
This damper has 20 low speed adjustments with detent clicks and 12 high speed adjustments with lobe clicks. The linkage is greased and sealed with a rubber boot for long life and is adjustable for wear. The unit as shown weighs aprox. 1 Lb (453 grams) and is rebuildable.
Advantages:
- Unique bell curve damping
- Improved traction out of corners by keeping the rear end compliant
- Does not mount in a dangerous position over the bars to cause injury to your chest or chin
- Does not raise your handlebars at all in most applications
Can be used with: Stock, Shock & Vibe, BRP, and PHDS clamps in multiple positions - Can be used with standard handlebars or Flexx Bars, no razed crossbar needed
- Allows you to run a bar pad for your protection and still adjust the damper with it on
- Fully greased and sealed linkage (no lubricating with dirt) wear adjustable linkage to ensure there is no slop in the steering